Equinox AWD V6-3.4L VIN F (2006)
13. Install the transaxle fluid temperature sensor (36) into the front control valve body fluid temperature sensor bore.
14. Install the transaxle fluid temperature sensor clip (49).
15. Install the fluid temperature sensor bolt (31).
^
Tighten the bolt to 10 Nm (89 inch lbs.).
16. Connect the 8 solenoid wire connectors as follows:
^
1 blue
^
2 black
^
3 green
^
4 black
^
5 blue
^
6 gray
^
7 brown
^
8 black
17. Install the control valve body cover.
18. Perform the transmission adaptive learn procedure. Refer to Transmission Adaptive Learn Procedure.
