Equinox AWD V6-3.4L VIN F (2006)
5. Rotate the suspension knuckle downward while simultaneously guiding the constant velocity (CV) joint spindle to the wheel hub and bearing
assembly of the suspension knuckle.
6. Hand install a new wheel drive shaft spindle nut.
7. Position the insulators to the coil spring and align the ends of the coil spring with the abutments of the insulators.
8. Secure each of the insulators to the coil spring using 2 plastic tie straps positioned 180 degrees apart and through the reliefs molded into the
insulators.
9. Cut off any excess length of the tie straps.
10. Position the coil spring assembly to the lower control arm.
