Equinox AWD V6-3.4L VIN F (2006)
11. Position a support stand under the lower control arm.
12. Carefully raise the lower control arm while simultaneously guiding the coil spring assembly into the rear suspension cradle.
13. Position the suspension knuckle to the lower control arm.
14. Notice: Refer to Fastener Notice in Service Precautions.
Important: Ensure that the hex head of the suspension knuckle bolt faces the rear of the vehicle.
Install the lower control arm-to-suspension knuckle bolt and nut.
^
Tighten the bolt and nut to 160 Nm (118 ft. lbs.).