Express 1/2 Ton Van V8-5.7L VIN R (1999)
1. Disconnect the rear brake pipe from the brake hose.
2. Remove the retaining nut and retaining clip from the front of the rear brake hose.
3. Disconnect the rear brake pipes on the rear axle from the brake hose.
4. Remove the retaining bolt of the rear brake hose from the rear axle.
5. Remove the bracket of the rear brake hose from the rear axle.
6. Remove the brake hose from the vehicle.
INSTALLATION PROCEDURE
1. Install the rear brake hose to the vehicle.
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Connect the rear brake pipes on the rear axle to the brake hose.
^
Tighten the rear brake pipes to the brake hose to 17 Nm (13 ft. lbs.).
