Express 1/2 Ton Van V8-5.7L VIN R (1999)
3. Install the retaining bolt of the rear brake hose to the rear axle.
4. Install the bracket of the rear brake hose to the rear axle.
5. Install the retaining bolt of the rear brake hose to the rear axle.
^
Tighten the retaining bolt to 17 Nm (13 ft. lbs.).
IMPORTANT: Make sure the brake hose is not twisted. Make sure the brake hose is not in contact with any suspension components.
6. Install the retaining nut and retaining clip to the front brake hose.
7. Connect the rear brake pipe to the brake hose.
8. Bleed the brake hydraulic system.
Tube Adapter Replacement
REMOVAL PROCEDURE