Express 1/2 Ton Van V8-5.7L VIN R (1999)
Installation Procedure
1. Align the Inflatable Restraint module to the steering wheel.
Caution: Refer to Inflator Module Handling Caution in Cautions and Notices.
2. Install the electrical connector.
3. Install the CPA retainer.
4. Install the SIR lead wire to the clip on the steering wheel.
5. Install the SIR lead wire to the clip on the inflator module.
6. Ensure that the wiring is not exposed or trapped between the Inflatable Restraint Steering Wheel Module and the steering wheel.
