Express 1/2 Ton Van V8-5.7L VIN R (1999)
Power Steering Pump: Service and Repair
Pulley Removal and Installation
REMOVAL PROCEDURE
-
Tools Required
-
J 25034-C Power Steering Pulley Remover
1. Remove the serpentine belt from the vehicle. Install a 3/8 inch drive ratchet on the tensioner arm and rotate the arm counterclockwise.
2. Install the J 25034-C to the outer lip of the steering pump.
3. Remove the pulley.
INSTALLATION PROCEDURE
-
Tools Required
-
J 25033-C Power Steering Pump Pulley Installer
