Express 1/2 Ton Van V8-5.7L VIN R (1999)
10. Using the J-23742 separate the ball joint from the steering knuckle.
11. Remove the J-23742.
12. Pull the stud away from the knuckle.
13. Remove the ball joint.
INSTALLATION PROCEDURE
1. Install a new upper ball joint to the upper control arm.
2. Position four attaching bolts and nuts.
NOTICE: Refer to Fastener Notice in Service Precautions.
-
Tighten the nuts to 24 Nm (18 ft. lbs.).