Express 1/2 Ton Van V8-5.7L VIN R (1999)
Fluid Line/Hose: Service and Repair
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the oil cooler lines from the transmission and radiator.
Important: Perform the following procedures when removing the retaining ring and cooler line from the quick connect fitting on the transmission.
3. Pull the plastic cap back from the quick connect fitting and down along the cooler line about two inches.
4. Using a bent-tip screwdriver, pull on one of the open ends of the retaining ring in order to rotate the retaining ring around the quick connect fitting
until the retaining ring is out of position and can be completely removed.
