Express 2500 V8-6.6L DSL Turbo (2010)
4. Remove the air temperature actuator.
Installation Procedure
1. Install the air temperature actuator.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the retaining screws to the air temperature actuator and tighten to 1.9 Nm (17 lb in).
3. Connect the air temperature electrical connector to the actuator.
4. Install the left rear quarter trim panel. Refer to Body Side Trim Panel Replacement - Left Side (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair/Body Side Trim Panel Replacement - Left Side).
Auxiliary Mode Valve Actuator Replacement
Auxiliary Mode Valve Actuator Replacement
Removal Procedure
1. Remove the auxiliary HVAC module assembly. Refer to Auxiliary HVAC Module Removal and Installation (See: Housing Assembly
HVAC/Service and Repair/Auxiliary HVAC Module Removal and Installation).
2. Remove the retaining screws from the auxiliary mode actuator.
3. Remove the auxiliary mode actuator.
