Express 2500 V8-6.6L DSL Turbo (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the fuel pressure regulator bracket nut and bolt and tighten to 10 Nm (89 lb in).
4. Install the upper right valve cover. Refer to Valve Rocker Arm Upper Cover Replacement - Right Side (LMM) (See: Engine, Cooling and
Exhaust/Engine/Cylinder Head Assembly/Valve Cover/Service and Repair/Valve Rocker Arm Upper Cover Replacement - Right Side).
5. If the fuel injectors were replaced, refer to Fuel Injector Flow Rate Programming (See: Procedures).
6. Prime the fuel system. Refer to Fuel System Priming (See: Service and Repair/Fuel System Priming).
7. Start the engine. If the engine stalls, repeat the above step.
8. Once the engine starts, inspect for fuel leaks.
9. Install the engine cover. Refer to Engine Cover Replacement (See: Body and Frame/Access Cover/Service and Repair).
Indirect Fuel Injector Replacement
Indirect Fuel Injector Replacement
Special Tools
CH 49736 - Hydrocarbon Injector Quick Connect Release Tool
For equivalent regional tools, refer to Special Tools (See: Engine, Cooling and Exhaust/Engine/Tools and Equipment/Special Tools).
Removal Procedure
