Express 2500 V8-6.6L DSL Turbo (2010)
6. Connector the fuel pressure relief valve electrical connector (1).
7. Install the high pressure fuel pipe (2) and tighten to 30 Nm(22 lb ft).
8. Install the left fuel injector feed pipes. Refer to Fuel Injection Fuel Feed Pipe Replacement - Left Side (See: Fuel Supply Line/Service and
Repair/Fuel Injection Fuel Feed Pipe Replacement - Left Side).
9. Install the A/C compressor.
10. Prime the fuel system. Refer to Fuel System Priming (See: Service and Repair/Fuel System Priming).
11. Start the engine.
If the engine does not start, repeat the above step.
12. Inspect the fuel system for fuel leaks.
13. Install the engine cover. Refer to Engine Cover Replacement (See: Body and Frame/Access Cover/Service and Repair).
VIN 6
Fuel Injection Fuel Rail Assembly Replacement - Bank 2
Removal Procedure
1. Remove the engine cover. Refer to Engine Cover Replacement (See: Body and Frame/Access Cover/Service and Repair).
2. Remove the air conditioning (A/C) compressor.
3. Remove the left fuel rail fuel feed pipe. Refer to Fuel Injection Fuel Feed Front Pipe Replacement - Left Side (See: Fuel Supply Line/Service and
Repair/Fuel Injection Fuel Feed Front Pipe Replacement - Left Side).
4. Remove the right fuel rail fuel feed pipe. Refer to Fuel Injection Fuel Feed Front Pipe Replacement - Right Side (See: Fuel Supply Line/Service
and Repair/Fuel Injection Fuel Feed Front Pipe Replacement - Right Side).
5. Remove the left fuel injector feed pipes. Refer to Fuel Injection Fuel Feed Pipe Replacement - Left Side (See: Fuel Supply Line/Service and
Repair/Fuel Injection Fuel Feed Pipe Replacement - Left Side).