Express 2500 V8-6.6L DSL Turbo (2010)
6. Install the auxiliary positive battery cable to the chassis harness clips (2).
7.
Install the auxiliary positive battery cable to the frame clips (1).
8. Connect the auxiliary positive battery cable to the auxiliary battery and tighten the terminal to 14 Nm (123 lb in).
9. Connect the auxiliary negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Negative/Service and
Repair/Battery Negative Cable Disconnection and Connection).
VIN 6
Auxiliary Battery Positive Cable Replacement (LGH,LMM)
Removal Procedure
Warning: Refer to Battery Disconnect Warning (See: Service Precautions).
1. Disconnect the auxiliary battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (See: Negative/Service and
