Express 3/4 Ton Van V8-5.7L VIN R (1998)
-
J36850 Transjel Transmission Assembly Lubricant
1. Install the 3-4 accumulator pin into the transmission case.
2. Install the 3-4 accumulator piston onto the pin.
The piston legs must face the valve body.
3. Install the 3-4 accumulator piston oil seal ring.
4. Install the 3-4 accumulator piston spring.
5. Install the J25025-B to the transmission case.
6. Install the case gasket and the valve body gasket to the spacer plate. The case gasket is identified by a C. The valve body gasket is identified by a
V.
7. Use the J36850 in order to retain the gaskets to the spacer plate.
