Express 4500 V8-6.0L (2010)
Installation Procedure
Warning: Refer to Battery Disconnect Warning (See: Service Precautions).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
Note: Clean any existing corrosion from the battery terminal bolt flange and the battery cable end.
1. Install the negative cable terminal bolt and cable to the battery and Tighten to 14 Nm (123 lb in).
Note: Clean any existing corrosion from the battery terminal bolt flange and the battery cable end.
2. If applicable, install the auxiliary negative cable terminal bolt (1) and cable (2) to the auxiliary battery and tighten to 14 Nm (123 lb in).