HHR L4-2.4L (2010)
Compression Check: Specifications
COMPRESSION CHECK
If a cylinder has low compression, inject approximately 15 ml (1 tablespoon) of engine oil into the combustion chamber through the spark plug hole.
Measure the compression again and record the reading.
The minimum compression in any 1 cylinder should not be less than 70 percent of the highest cylinder. No cylinder should read less than 690 kPa (100
psi).
For example, if the highest pressure in any 1 cylinder is 1 035 kPa (150 psi), the lowest allowable pressure for any other cylinder would be 725 kPa (105
psi). (1 035 x 70% = 725) (150 x 70% = 105).