HHR L4-2.4L (2010)
4. Connect the lock cylinder solenoid harness connector.
5. Install the steering column trim covers. Refer to Steering Column Trim Cover Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Trim Cover Replacement).
6. Check the operation of the ignition lock cylinder solenoid.
Ignition Lock Cylinder Case Replacement
Ignition Lock Cylinder Case Replacement
Removal Procedure
1. Remove the steering wheel. Refer to Steering Wheel Replacement (See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Steering Wheel Replacement).
2. Remove the steering column trim covers. Refer to Steering Column Trim Cover Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Trim Cover Replacement).
3. Remove the theft deterrent control module, if equipped. Refer to Theft Deterrent Module Replacement (See: Accessories and Optional
Equipment/Antitheft and Alarm Systems/Alarm Module/Service and Repair).
