HHR L4-2.4L (2010)
9. If equipped with a automatic transaxle, perform the following steps, remove the positive/negative battery cable ground nut (2).
10. Remove the positive/negative cable ground terminal (1) from the transaxle stud.
11. Remove the starter solenoid nut (4).
12. Remove the positive/negative battery cable (3) from the starter.
13. If equipped with a manual transaxle, perform the following steps, remove the positive/negative battery cable ground nut (1).
14. Remove the positive/negative cable ground terminal (2) from the transaxle stud.
15. Remove the starter solenoid nut (4).
16. Remove the positive/negative battery cable (3) from the starter.
Installation Procedure
