HHR L4-2.4L (2010)
Steering Gear: Service and Repair
Steering Gear Replacement
Steering Gear Replacement (LE8 and LE9) (2.2L and 2.4L)
Special Tools
J 24319-B - Steering Linkage and Tie Rod Puller
Removal Procedure
Caution: With wheels of the vehicle facing straight ahead, secure the steering wheel utilizing steering column anti-rotation pin, steering column
lock, or a strap to prevent rotation. Locking of the steering column will prevent damage and a possible malfunction of the SIR system. The steering
wheel must be secured in position before disconnecting the following components:
*
The steering column
*
The intermediate shaft(s)
*
The steering gear
After disconnecting these components, do not rotate the steering wheel or move the front tires and wheels. Failure to follow this procedure may
cause the SIR coil assembly to become un-centered and cause possible damage to the SIR coil. If you think the SIR coil has became un-centered,
refer to your specific SIR coil's centering procedure to re-center SIR Coil.
1. Turn the steering wheel to the straight ahead position and lock it in place.
2. Remove the front tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
3. Remove both rack and pinion outer tie rod end nuts and discard them.