Impala V6-3.8L SC VIN 1 (2005)
![background image](/chevrolet/impala/v6-3.8l_sc_vin_1/Page-2075009.png)
3. Install the bolt to the front bumper fascia upper support.
1. Tighten the bolt to the front bumper fascia upper support to 10 N.m (89 lb in).
2. Tighten the bolts to the hood latch center support to 10 N.m (89 lb in).
4. Install the upper radiator air baffle.
5. Close the hood.
Fascia Support Replacement - Front Bumper Lower (Impala)
Fascia Support Replacement - Front Bumper Lower (Impala)
Tools Required
J 38778 Door Trim Pad Clip Remover
Removal Procedure
1. Remove the screws from the lower front bumper fascia.
2. Remove the push-in retainers from the front bumper fascia lower support at the front bumper impact bar using J 38778.
3. Remove the front bumper fascia lower support from the front bumper fascia and front bumper impact bar.
Installation Procedure