Impala V6-3.8L SC VIN 1 (2005)
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolts to 10 N.m (89 lb in).
3. Install the accelerator cable (2) to the throttle body lever.
4. Install the accelerator cable (2) to the bracket (1).
5. Install the cruise control cable (1) to the bracket (2).
6. Install the cruise control cable to the throttle body lever.
7. Check for complete throttle opening and closing positions by operating the accelerator pedal. Also check for poor carpet fit under the accelerator
pedal.
IMPORTANT: The throttle should operate freely, without binding, between full closed and wide open throttle.
8. Install the fuel injector sight shield.