K 1500 Truck 4WD V8-305 5.0L (1988)
FIGURE NO. 2 - INSTALLING VENT SLEEVE AND PIPE ASSEMBLY
3.
Install a vent sleeve and pipe assembly in the vent tube hole (Figure No. 2).
-
Position the end of the fitting toward clutch housing.
-
Install with dull wide blade screwdriver.
4.
Attach 660 mm (2'6") of 8.00 mm (5/16") I.D. hose to the pipe assembly and secure it with a worm type clamp.
5.
Reinstall transmission (also transfer case if applicable).
6.
Install a NEW vent assembly in the end of the hose.
FIGURE NO. 3 - ENGINE COWL OF 1988 C/K TRUCK
7.
Secure the hose to the large wire harness underhood on the passenger side of the engine cowl with a plastic tie wrap (Figure No. 3).
SERVICE PARTS INFORMATION
PART