Lumina V6-3.1L VIN J (2000)
![background image](/chevrolet/lumina/v6-3.1l_vin_j/Page-1393002.png)
8. Remove the accelerator cable from vehicle noting cable routing.
INSTALLATION
NOTE: Do not route flexible components (hoses, wires, conduits, etc.) within 50 mm (2 in) of moving parts unless flexible components can be
securely fastened. This is necessary in order to prevent possible interference and damage to the component.
1. Install accelerator cable into car using routing noted during removal
2. Install the snap retainer through the bulkhead.
3. Connect the accelerator cable (5) in the slot in the accelerator pedal lever (1).
4. Seat the snap retainer in the accelerator pedal lever.