Lumina V6-3.1L VIN J (2000)
5. Connect the accelerator cable to the throttle body lever.
6. Connect the accelerator cable to the accelerator cable bracket.
7. Connect the accelerator cable into the retaining clip.
8. Reinstall the accelerator cable shield, if equipped.
9. Inspect for complete throttle opening and closing positions by operating the accelerator pedal. Also inspect for poor carpet fit under the accelerator
pedal.
10. Inspect the throttle should operate freely, without binding, between full closed and wide open throttle.
11. Reinstall the left instrument panel sound insulator.
