Lumina V6-3.1L VIN J (2000)
7. Use the J33003, the J29794 and the J2619-01 in order to separate the right side front wheel drive axle (1) from the transaxle.
8. Use the following steps in order to separate the left side front wheel drive axle shaft (1) from the transaxle:
^
Use the frame for leverage
^
Place a flat-bladed tool into the groove provided on the front wheel drive shaft tri-pot joint. Use the flat-bladed tool in order to separate the left
side front wheel drive axle shaft (1) from the transaxle.
9. Remove the front wheel drive shaft bearing through the steering knuckle.
Installation Procedure
Important: Prevent the boots (seals) from contacting the other components in order to prevent damage to the seals (boots).