Workshop Manuals Factory service & repair Chevrolet
01 Relays and Modules02 Sensors and Switches03 Maintenance04 Engine, Cooling and Exhaust05 Powertrain Management06 Transmission and Drivetrain07 Brakes and Traction Control08 Starting and Charging09 Power and Ground Distribution10 Steering and Suspension11 Heating and Air Conditioning12 Restraint Systems13 Accessories and Optional Equipment14 Body and Frame15 Cruise Control16 Instrument Panel, Gauges and Warning Indicators17 Lighting and Horns18 Windows and Glass19 Wiper and Washer Systems
Chevrolet Lumina V6-3.8L VIN K (1998)03 · Maintenance
03 · Maintenance

Vehicle Lifting: Service and Repair

Make
Chevrolet
Model
Lumina
Engine
V6-3.8L VIN K
Year
1998
Section
Vehicle Lifting › Service and Repair
MaintenanceService and Repair · page 1 of 2
background image

Vehicle Lifting: Service and Repair

VEHICLE LIFTING AND JACKING

Caution: To avoid any vehicle damage, serious personal injury, or death, when components are removed from the vehicle and the vehicle is
supported by a hoist, perform the following steps:

^

Chain the vehicle to the hoist at the same end as the components that are being removed.

^

Support for the vehicle at the opposite end from which the components are being removed.

Caution: To avoid any vehicle damage, serious personal injury, or death, always use the jackstands to support the vehicle when lifting the
vehicle with a jack.

Notice: Perform the following steps before beginning any vehicle lifting or jacking procedure:

1. Remove or secure all of the vehicle's contents in order to avoid any shifting or any movement that may occur during the vehicle lifting or jacking

procedure.

2. The lifting equipment or the jacking equipment weight rating must meet or exceed the weight of the vehicle and any vehicle contents.
3. The lifting equipment or the jacking equipment must meet the operational standards of the lifting equipment or jacking equipment's manufacturer.
4. Perform the vehicle lifting or jacking procedure on a clean, hard, dry, level surface.
5. Perform the vehicle lifting or jacking procedure only at the identified lift points. DO NOT allow the lifting equipment or jacking equipment to

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

Parts & tools for this job For 1998 Chevrolet Lumina 3.8L

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.