Malibu L4-2.4L (2010)
7. Install the radiator surge tank pipe to the crossover pipe.
8. Install the radiator surge tank pipe bolts (2) and tighten to 10 Nm (89 lb in).
9. Install the radiator surge tank inlet hose to the inlet pipe.
10. Position the radiator surge tank inlet hose clamp (1) at the surge tank inlet pipe.
11. Install the power steering pump. Refer to Power Steering Pump Replacement (See: Steering and Suspension/Steering/Power Steering/Power
Steering Pump/Service and Repair/Power Steering Pump Replacement).
12. Install the drive belt idler pulleys. Refer to Drive Belt Idler Pulley Replacement ().
13. Install the generator. Refer to Generator Replacement (See: Starting and Charging/Charging System/Alternator/Service and Repair/Generator
Replacement).
14. Install the intake manifold cover. Refer to Fuel Injector Sight Shield Replacement ().
