Malibu L4-2.4L (2010)
Parking Lock Cable: Service and Repair
4T45-E - Automatic Transmission
Park Lock Cable Replacement
Removal Procedure
1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair).
2. Remove the console. Refer to Front Floor Console Replacement (See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Front Floor Console Replacement).
3. Place the transmission shift control lever in the PARK position.
4. Remove the park lock cable end (1) from the park lock lever by sliding the cable end rearward off the park lock lever pin.
5. Release the park lock cable retainer (2) from the shift control base.
6. Remove the knee bolster. Refer to Driver Knee Bolster Panel Replacement (See: Restraint Systems/Knee Diverter/Service and Repair).
7. Turn the ignition key to the RUN position.
