Malibu Classic L4-2.2L (2008)
*
Install the rear energy absorber.
*
For the extended sedan only, install the license lamp. Refer to Rear License Lamp Replacement (Extended Sedan) Rear License Lamp
Replacement (Sedan).
*
For the extended sedan only, install the license plate.
2. With the aid of an assistant, position the rear bumper fascia over the rear bumper impact bar. Engage the fascia locators at the quarter panel ends.
3. Engage the fascia key slot retainers to the rear fascia outer supports. Press firmly inward to seat the fascia.
4. Install the push-in retainers to the rear bumper fascia center support.
5. Install the push-in retainers to the lower rear bumper fascia.
