chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Rear Bumper Reinforcement > < Rear Bumper Fascia Center Support Replacement|Page 15575
Page 4
background image

6. For the extended sedan only, connect the license lamp electrical connector.
7. Pull back the rear wheelhouse liner. Install the push-in retainer to the quarter panel to the fascia.

8. Install the push-in retainers to the wheelhouse liner to the rear bumper fascia.
9. Remove the protective tape.

10. Lower the vehicle.
11. Close the rear compartment.

Rear Bumper Reinforcement > < Rear Bumper Fascia Center Support Replacement|Page 15575