Malibu Classic L4-2.2L (2008)
5. Install the floor console.
6. Install the 2 front cable plastic retainers to the body.
7. Install the front cable retainer screw.
Tighten the screw to 2 N.m (18 lb in).
8. Connect the electrical connector to the park brake warning lamp switch.
9. Position the carpet back into place.
10. Install the 3 park brake pedal assembly nuts (1, 2, 3). Tighten in sequence as shown.
Tighten the nuts to 25 N.m (18 lb ft).
