Malibu Classic L4-2.2L (2008)
7. Disconnect the fuel tank EVAP pipe quick connect fitting (2) from the chassis EVAP pipe (4).
8. Cap the chassis fuel and EVAP pipes in order to prevent possible fuel and/or EVAP system contamination.
9. Loosen the fuel fill pipe hose clamp (3) at the fuel tank.
10. Separate the fuel fill pipe hose from the fuel tank.
11. Disconnect the fuel tank EVAP emission canister vent pipe quick connect fitting (2) from the fuel tank fill EVAP emission pipe.
12. Remove the fuel tank fill pipe.
Installation Procedure
1. Install the fuel tank fill pipe.
2. Install the fuel fill pipe hose to the fuel tank.
3. Connect the fuel tank EVAP emission canister vent pipe quick connect fitting (2) from the fuel tank fill EVAP emission pipe.
Notice: Refer to Fastener Notice.
4. Tighten the fuel fill pipe hose clamp (3) at the fuel tank.
