Malibu Classic L4-2.2L (2008)
Tighten the clamp to 4 N.m (35 lb in).
5. Remove the caps from the fuel and EVAP pipes.
6. Connect the fuel tank EVAP pipe quick connect fitting (2) to the chassis EVAP pipe (4).
7. Connect the fuel tank fuel feed pipe quick connect fitting (1) to the chassis fuel feed pipe (3).
8. Install the fuel tank fill pipe bolt (2) to the underbody side rail.
Tighten the bolt to 9 N.m (80 lb in).
9. Lower the vehicle.
10. Install the fuel tank fill pipe bolt (1) to the fuel tank fill pipe housing.
Tighten the bolt to 1.5 N.m (13 lb in).
11. Refill the fuel tank.