Malibu Classic L4-2.2L (2008)
8. Install the power steering hose routing clip (1) to the generator bracket stud and install the nut (2).
Tighten the nut to 5 N.m (45 lb in).
9. Position the front engine lift bracket (2) and install the 3 bolts (1).
Tighten the engine lift bracket bolts to 50 N.m (37 lb ft).
10. Install the drive belt idler pulley.
11. Install the power steering pump pulley.
12. Install the drive belt from the vehicle.
13. Install the intake manifold cover.
14. Fill and bleed the power steering system. Refer to Power Steering System Bleeding.