Metro L3-061 1.0L VIN 6 TBI (1998)
Brake Hose/Line: Service and Repair
Pipe Replacement (Front)
REMOVAL PROCEDURE
1. Clean all of the dirt and foreign material from the pipes and the fittings.
2. For vehicles without ABS, remove the pipe(s) to be replaced at the following locations (where applicable):
^
Proportioning valve (8)
^
Master cylinder (4)
^
Front brake hose fitting pipe
3. For vehicles with ABS, remove the pipes to be replaced at the following locations (where applicable):
^
Proportioning valve Master cylinder (2)