Metro L3-061 1.0L VIN 6 TBI (1998)
Clutch Cable: Service and Repair
REMOVAL PROCEDURE
1. Remove the clutch cable adjustment nut (2) from the cable end at the clutch release lever (3).
2. Remove the clutch cable (1) from the clutch release lever (3).
3. Remove the clutch cable bracket.
4. Remove the 2 clutch cable grommet bolts (3) from the bulkhead (1).
5. Remove the clutch cable clevis (1) from the clutch pedal lever.
6. Remove the clutch cable (2) from the vehicle by pulling through the bulkhead from the engine compartment side.
7. Inspect the clutch cable (2) for the following conditions:
^
Fraying
^
Kinks