Metro L3-061 1.0L VIN 6 TBI (1998)
18. Inspect the left case cover O-rings for cuts or damage. Replace if necessary.
19. Install the left case cover O-rings.
20. Install the left case cover (2).
^
Tighten 3 left case cover bolts (1) to 12 Nm (106 inch lbs.).
21. Apply GM P/N 12346004, or equivalent, to the threaded portion of the transaxle drain plug.
22. After the transaxle has completely drained, install the transaxle drain plug (2).
23. Add approximately 2.4 liters (2.5 qts.) of Castrol (R) Syntorq Transmission Fluid, or the equivalent, into the transaxle oil level/filler plug hole (1).
The oil level should be even with the bottom of the transaxle plug hole.
24. Apply GM P/N 12346004, or the equivalent, to the transaxle oil level/filler plug threads.
25. Install the transaxle oil level/filler plug into the transaxle.
^
Tighten the transaxle oil level/filler plug to 21 Nm (15 ft. lbs.).
26. Lower the vehicle.