Metro L3-061 1.0L VIN 6 TBI (1998)
Windshield Washer Spray Nozzle: Service and Repair
Front Washer Nozzle Replacement
REMOVAL PROCEDURE
IMPORTANT: If a nozzle becomes plugged, apply air pressure in order to remove the obstruction. It the nozzle remains plugged, replace the nozzle.
1. Disconnect the washer hose (6) From the nozzle (7).
2. Gently disengage the lock tabs of the nozzle From the underside of the hood.
3. Remove the nozzle (1) and the seal From the hood (2)
4. Remove the seal From the nozzle.
INSTALLATION PROCEDURE
