Monte Carlo V6-3.8L SC VIN 1 (2004)
3. Install the lower engine mount strut bracket nut.
-
Tighten the lower engine mount bracket nut to 30 Nm (22 ft. lbs.).
4. Connect the negative battery cable.
Engine Mount Strut Bracket Replacement - Upper Radiator Support
Engine Mount Strut Bracket Replacement - Upper Radiator Support
Removal Procedure
1. Remove the engine mount struts from the engine mount strut brackets at the upper radiator support.
2. Remove the four bolts from the engine mount strut bracket to the upper radiator support.
3. Remove the engine mount strut bracket from the upper radiator support.
Installation Procedure
