Monte Carlo V6-3.8L SC VIN 1 (2004)
1. Position the engine mount strut bracket over the upper radiator support so the engine mount strut bracket and the engine mount strut are aligned.
Align the engine mount strut bracket with the proper holes of the upper radiator support.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the four bolts through the engine mount strut bracket to the upper radiator support.
-
Tighten the engine mount strut bracket bolts at the upper radiator support to 28 Nm (21 ft. lbs.).
3. Install the engine mount struts to the engine mount strut brackets at the upper radiator support.
Engine Mount Strut Replacement - Left
Engine Mount Strut Replacement - Left
Removal Procedure
