Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Cross-Member: Service and Repair
Transmission Support Replacement
REMOVAL PROCEDURE
1. Raise and suitably support the vehicle.
2. Remove the front tire and wheel assemblies.
3. Remove the following components from the crossmember:
^
The one bolt (13)
^
The four nuts (12,14, 15,16)
4. Support the front suspension crossmember with a jack.
5. Remove the following components:
^
The two suspension support brace nuts (4,6) The suspension support brace (5)