Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
7. Install, but do not tighten, the six bolts (2, 3, 5, 6, 7) on the left side of the vehicle.
8. Install, but do not tighten, the six bolts (2, 3, 8, 9,11) on the right side of the vehicle.
9. Remove the jack from the center of the crossmember.
10. Install the nut (14) and the bolt (13).
Tighten
Tighten the rear transaxle mount nut and the bolt to 60 N.m (45 lb ft).
11. Install the three nuts (12,15, 16).
Tighten
Tighten the rear transaxle mount nuts to 57 N.m (42 lb ft).
