Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
5. If the vehicle is not equipped with a front stabilizer shaft, install the stud (3).
Tighten
Tighten the stud to 147 Nm (109 ft. lbs.).
6. If the vehicle is not equipped with a front stabilizer shaft, install the one nut (2).
Tighten
Tighten the nut to 19 Nm (14 ft. lbs.).
7. Raise and support the right lower control arm.
8. Install, but do not tighten, the following components to the suspension crossmember:
^
The right lower control arm
^
The five bolts (1, 2, 8, 9, 11)
^
The bracket (10)
^
The one nut (12)