Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
15. Install the nut (14) and the bolt (13).
Tighten
Tighten the nut and the bolt to 60 Nm (45 ft. lbs.).
16. Install the three nuts (12, 15, 16).
Tighten
Tighten the nuts to 57 Nm (42 ft. lbs.).
17. If the vehicle is not equipped with a front stabilizer shaft, install the following components:
^
The suspension support brace (5)
^
The two suspension support brace nuts (4, 6)
Tighten
Tighten the nuts to 69 Nm (51 ft. lbs.).