Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Brake Caliper: Service and Repair
Disc Brakes
Brake Caliper Replacement
REMOVAL PROCEDURE
1. Raise and suitably support the vehicle.
2. Remove the tire and wheel assembly.
3. Remove the brake hose union bolt (1). Place a container beneath the brake hose in order to catch escaping brake fluid.
4. Disconnect the brake hose.
5. Remove the two caliper pin bolts (1).
6. Remove the caliper housing from caliper bracket.
7. Inspect the following components for corrosion and wear. Replace any part if necessary:
^
The mounting bolts
^
The caliper pins
^
The dust boots
8. Remove the brake pads, insulators, retainers, and the wear indicator from the caliper housing.
INSTALLATION PROCEDURE