Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
1. Install the brake pads, insulators, retainers, and the wear indicator to the caliper housing.
2. Install the caliper housing to the caliper bracket. Secure with two caliper pin bolts (1).
^
Tighten the caliper pin bolts to 34 Nm (25 ft. lbs.).
3. Apply Lubriplate Lubricant, GM P/N 12346293 or equivalent, or a lubricant meeting the requirements of NLGI #2 Category LB or GC-LB.
4. Install the brake hose union bolt (1).
^
Tighten brake hose union bolt to 30 Nm (22 ft. lbs.).
5. Install the tire and wheel assembly to the vehicle.
6. Lower the vehicle.
7. Fill the master cylinder fluid reservoir.
8. Bleed the brakes.
Brake Caliper Overhaul
REMOVAL PROCEDURE