Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
1. Remove the caliper from the vehicle.
2. Remove the caliper set ring (3) and the piston boot (2).
CAUTION: Do not place your fingers in front of the piston in order to catch or protect the piston while applying compressed air. This
could result in serious injury.
3. Insert a block of hard wood or a shop cloth (2) into the caliper interior. This will catch the piston as the piston is forced out of the bore with
compressed air.
4. Remove the piston from the caliper (1) by applying compressed air to the caliper brake hose connector hole.
5. Remove the piston seal from the caliper housing by using a screwdriver.
