Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
8. Install the fuel injector wiring harness. Secure the harness using three bolts (3,4).
^
Tighten the bolts to 12.7 Nm (9 ft. lbs.).
9. Connect the four fuel injector connectors to the fuel injectors.
10. Connect the following components to the throttle body:
^
The throttle position (TP) sensor connector
^
The idle air control (IAC) valve connector
^
The manifold absolute pressure (MAP) sensor connector
^
The two coolant bypass hose clamps
^
The coolant bypass hoses
11. Install the air cleaner top assembly.
12. Connect the air cleaner hose (1) to the throttle body.
13. Connect the Intake Air Temperature (IAT) sensor connector to the air cleaner.
14. Install the Throttle Valve (TV) cable (automatic transmission).
15. Install the accelerator cable to the throttle body (1).
16. Refill the cooling system as necessary.
17. Connect the negative battery cable.