Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
11. Remove the five exhaust manifold nuts (1).
12. Remove the following components:
^
The exhaust manifold
^
The gasket
13. Remove the three lower heat insulator bolts.
14. Remove the lower heat insulator.
INSTALLATION PROCEDURE
NOTICE: Refer to fastener Notice in Service Precautions.
1. Install the lower heat insulator to the exhaust manifold. Secure the insulator using three bolts.
^
Tighten the lower heat insulator bolts to 15 Nm (11 ft. lbs.).
2. Install the following components:
^
The new exhaust manifold gasket
^
The exhaust manifold
3. Secure the manifold using five exhaust manifold nuts (1).
^
Tighten the exhaust manifold nuts to 48 Nm (36 ft. lbs.).
4. Install the upper heat insulator. Secure the insulator using six bolts.
^
Tighten the upper heat insulator bolts to 15 Nm (11 ft. lbs.).
5. Raise and properly support the vehicle.