Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Notice: Refer to Component Tightening Notice in Cautions and Notices.
2. Tighten the HO2S 2.
Tighten
Tighten the HO2S 2 to 44 N-m (32 lb ft).
3. Install the wiring and the body plug (2) into the floor pan.
4. Lower the vehicle.
5. Pass the HO2S wiring under the heater floor duct.
6. Connect the HO2S 2 electrical connector (1).
7. Install the passenger side carpet back along the console area.
8. Install the front floor console.
